Download MTK Droid Root & Tools v2.5.2

Download MTK Droid Root & Tools v2.4.6 & v2.5.2 from here, here and here.
Before use it is necessary to check that:
- adb drivers are installed, in a device manager there shouldn't be unknown devices at connection of switched-on phone. ADB Drivers here.
- USB debugging in Developer options of System setting is allowed.

How to RdBack ROM using SP FlashTool, to make the CWM recovery, to install SuperUser (get root) etc. If your phone is not rooted use the ROOT button.

1. Make ster by mns of MTKDroidTools
Ster is the text file with addresses of the blocks, necessary for the SP FlashTool program. After crtion of ster don't close the main window of the program! Otherwise once again it is necessary to turn on phone.

2. In SP FlashTool choose this ster and go on the Rd Back tab.

3. Choose path and a ROM file name. Click on Add button. Double click of a mouse on the appred line. Choose a file name, the name has to begin with ROM_ as offers FlashTool! Remember path and the name of ROM_ file.

4. Determine the ROM_ size. Type has to stand in HEX. In the field of Start Address it is necessary to write down 0x000000. In the field of Length we copy from ster the address of the block following after RECOVERY or the address of other block for fuller backup. For with type of the blocks EXT4 it is the cache block address. The in the Hex format has to begin with 0x

5 . Choose Rd Page Only on yaffs2 type blocks . In FlashTool choose Rd Page Only in the field of Rd Method. If this field isn't present, the window with this question can emerge, too we choose Page Only. On with EXT4 blocks it doesn't get out (as a rule).

6. Rd Back ROM_.Click on Rd Back button and connect the switched-off phone to PC. Here the options depending on a concrete phone are possible. Maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. Experiment and study work with FlashTool in thrds with similar ! On some MT6573 models, for example on B63, it can't be executed with any combinations and only testpoint need!

7. Prepare files for FlashTool and make CWM. If everything passed without errorss, we open the MTK Droid Root & Tools window which we left on 1th step. If for some rson the window isn't present, it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved on the 6th step. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is crted. Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Аttention! Yaffs2 type blocks from this backup can't be Downloaded to phone, they aren't correct! Use backup on 9th step if phone have yaffs2 type blocks!
8. Download new CWM to the phone. Start FlashTool, choose ster in the folder crted on the 7th step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was crted on the 7th step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process. DANGEROUS! On this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!

9. Make backup, install SuperUser etc. Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- backup! (if in phone there is yaffs2 type blocks, do here surely, they received with rdBack on 7th step aren't correct)
- install superuser (often mn "get root" under it)
- and other if need


Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of (for example ) you will have a brick even if you download these blocks rd from phone which you own! Always remove from them marks in SPFT!