Tuesday, May 24, 2016

8 Metro / Modern UI Style Jelly Bn 4.1.1 firmware installed on Pipo S1




1. First, download 8 Metro / Modern UI Style firmware from here or from here. Download the Pipo S1 .img files from here or from here. 2. Extract downloaded archives. Replace the boot, kernel & recovery img files with the ones provided in Oma_Odys_io_JB_v1.4/rockdev/ folder.
3. Connect tablet in bootloader mode.
4. If you don't have driver installed you can install it from "drivers" folder.
5. Go to the folder RKDevelopTool_v1.35 and run RKAndroidTool (do not change anything!).
6. If drivers are installed correctly, in the bottom will say "Found RKAndroid Loader Rock Usb".
7. Press Erase IDB and wait after it finish press OK (it will take 10-20 seconds)
8. Then press 'Run' button. Tablet will restart when everything finish.(first run may take up to 5 minutes)

Enjoy this fine relse!


Always keep in mind that this is not a review, just a first look at this firmware. You have to test it more for another details, to see if it satisfies your needs.

No comments:

Post a Comment