RK30 ROM by Oma installed on Pipo S1 tablet

1. First, download the proper S1 firmware from here. (mirror1 & mirror2).2. Extract downloaded archive. Copy the content of SDcard folder on a micro SD card, then insert it in your Pipo S1 tablet.
3. Connect tablet in bootloader mode.
4. If you don't have driver installed you can install it from "drivers" folder.
5. Go to the folder RKDevelopTool_v1.35 and run RKAndroidTool (do not change anything!).
6. If drivers are installed correctly, in the bottom will say "Found RKAndroid Loader Rock Usb".
7. Press Erase IDB and wait after it finish press OK (it will take 10-20 seconds)
8. Then press 'Run' button. Tablet will restart in Recovery mode when everything finish.
9. Select install zip from sdcard / choose zip from sdcard and apply corrections from SDCARD folder, strictly in order!
10. Reboot, and wait till it start (first run may take up to 5 minutes)
Enjoy this fine relse!
RK30 ROM by Oma ftures:- System ext4
- CWM Recovery 6.0.2.7
- External SD will be mounted as NAND (up to 64 GB)
- 2.5 GB Internal Storage - init.d Support
- USB-Hub enable - Gamepad (PS2, XBox, ...)
- Kernel modules (cifs, TUN, lan, )
- Ethernet Settings
- Asphalt 7 compatible
- Device = 7
- Latest hosts, SU, SU-binary, busybox
- MX -Player, Play Music & Volume +
- Reboot Menu, Kernel Tuner, Dateimanager HD (Root)
- Nova Launcher

Always keep in mind that this is not a review, just a first look at this firmware. You have to test it more for another details, to see if it satisfies your needs.